Temporary power, generators and site services across Kern CountyOpen daily, 7am-7pm

Job Site Power ยท Bakersfield, CA

Industrial Spot Cooling

Portable spot coolers and ducted air for warehouses, plant rooms and crews working through valley heat. Call (661) 605-6031 for a free estimate.

Get Rates: Industrial Spot Cooling

We call back during business hours, 7am to 7pm, seven days a week.

Portable spot cooler units lined up outside a big Kern County building, orange ducts running inside

Portable Cooling for Valley Heat

From June through September, the southern San Joaquin Valley regularly sees highs above 100 degrees, sometimes for weeks at a time. Inside a warehouse with no HVAC yet, an electrical room with a failed unit, or a packing line during harvest, temperatures can climb past what people and equipment can handle. Spot coolers bring the temperature down where it counts.

Our coolers range from small units for a server room or a break area to large ducted units that push conditioned air into a warehouse or a tank. Each unit takes power from a temp panel, plant power or a generator, and rejects heat through ducting to the outside. We plan the power, the ducting and the condensate drainage so the cooler works on day one.

Most of our cooling jobs are urgent. When a plant air conditioner fails in July, we try to get a cooler there the same day. Planned jobs go easier: a warehouse fit-out that will run through August, a refinery turnaround that needs a cooled break tent, or a tenant improvement where the rooftop units will not be live until fall. Those get a site walk, a written layout and units reserved before the heat arrives. We keep a mix of small and large coolers in the yard and rotate them out for cleaning between rentals. If the job also needs power, lighting or a pole, the Kern County jobsite power side of the business handles it on the same order.

Cooling Sized to the Space and the Heat

A spot cooler that works in a mild climate can fall short in a Bakersfield summer. Hot intake air reduces capacity, and a metal building gains heat fast through the roof. We look at the space, the heat load from people and equipment, and the outside temperature before choosing units. We also make sure the hot exhaust goes somewhere it will not be pulled back in.

Large coolers draw a lot of current. If the building does not have enough power, our Diesel Generator Rental units can run them, or our Temporary Power Pole Installation crew can add temporary service. We size the whole system together so nothing trips at 3pm.

Where Spot Coolers Go in Kern

Portable cooling works in a lot of places. These are the jobs we do most.

Warehouse and distribution centers

New distribution buildings in Shafter and the Tejon area are huge metal boxes that bake in summer. Coolers keep crews working through fit-out and racking, and keep tenants cool during HVAC failures.

Packing houses and cold storage

Almond, pistachio and produce plants run hard during harvest. Coolers back up failed HVAC in packing areas, offices and electrical rooms.

Electrical and control rooms

Drives, PLCs and switchgear overheat when room cooling fails. A spot cooler keeps them running until the permanent unit is fixed. In a pump station or a lift station with no windows, the room can hit alarm temperature within an hour of a unit failing, so we treat those calls as first priority.

Crew heat illness prevention

California heat illness rules require shade and cool-down areas for outdoor workers. A spot cooler in a break trailer or a tent gives crews a cool place to recover.

Setting Up Temporary Cooling

  1. Describe the space and the heat

    Tell us the size of the space, the number of people, the equipment in it and the target temperature. Photos help.

  2. Pick units and plan power

    We choose coolers and check the power available. If there is not enough, we add a generator or temp service.

  3. Deliver and duct

    We set the coolers, run the supply and exhaust ducts, and route condensate to a drain or a pump.

  4. Start and check temperatures

    We start the units and check the temperatures in the space. If it needs more, we adjust ducting or add a unit.

  5. Service and removal

    We clean filters and check units during the rental. When the permanent HVAC is back, we remove everything.

Ducting, Condensate and Power Draw

Exhaust ducting

Every spot cooler makes hot exhaust air. It has to go outside, into a ceiling plenum or into a space that can take the heat. Venting it back into the room wastes the cooler. We cut ducting to length and use window or door panels so the building can still be secured at night.

Condensate drainage

Coolers pull water out of the air. Units either collect it in a tank or pump it to a drain. In a packing house or a warehouse, we route it so it does not create a slip hazard.

Electrical load

Large coolers need dedicated circuits, sometimes at 208 or 480 volts. We check panel capacity before delivery and bring a generator if the building cannot carry the load.

Industrial Spot Cooling: Superintendent Questions

How fast can you deliver a spot cooler in Bakersfield?

For many urgent calls in and around Bakersfield, we can deliver the same day if units are available. During heat waves demand is high, so call as early in the day as you can.

Can a spot cooler cool an entire warehouse?

Spot coolers work best on specific areas: workstations, break rooms, packing lines, electrical rooms. Cooling a whole warehouse takes large ducted units or many coolers. After a walk-through we give you a straight answer on what a given building can get.

Do spot coolers meet California heat illness requirements?

Cal/OSHA rules require shade, water, rest and cool-down for outdoor workers in heat. A cooled break area can be part of your plan, but your safety program has to cover the rest. We provide the cooling equipment.

What power do industrial spot coolers need?

Small units run on standard 120 volt outlets. Larger units need 208, 240 or 480 volt circuits. We check your power before delivery and bring a generator if needed.

How long can we rent spot coolers for a Bakersfield warehouse?

As long as you need them. Some rentals last a weekend while a rooftop unit gets repaired. Others run the whole summer on a new building whose permanent HVAC is still on order. Monthly rates come out lower than daily rates, and we can add or remove units as the heat changes.

More site equipment

  • Temporary Power Pole Installation

    Temp service poles with meter base, panel and GFCI outlets, built and inspected for PG&E or SCE hookup.

  • Site Internet Service

    Cellular and satellite internet for job trailers, cameras and gate systems on sites with no wired service.

  • Camera Trailer Rental

    Mobile surveillance trailers with cameras, lights and alerts to protect copper, tools and equipment overnight.

  • Diesel Generator Rental

    Towable and skid diesel generators sized for valley heat, with fuel delivery and service included in the plan.

  • Tower Light Rental

    Diesel and LED light towers for night pours, shutdowns, harvest shifts and foggy winter mornings on the valley floor.

Pole, generator, lights or cooling on the next job? Send the address and the load. We will price it today.

Call (661) 605-6031